Magazine Publisher Replaces RTO With Energy Efficient RTO

When a Nebraska heat-set offset magazine printer needed to replace an aging Regenerative Thermal Oxidizer that was creating expensive problems with both maintenance and high energy consumption, they turned to The CMM Group for a turnkey installation of a 4,000 scfm RTO equipped with a secondary energy recovery system.

In order not to disrupt production, CMM installed the unit over a single weekend. After production was halted on a Friday afternoon, CMM disassembled part of the building’s roof, removed the existing RTO unit, installed the new, energy efficient CMM oxidizer, closed up the roof and had the new unit up […]

Printing Company Installs CMM Regenerative Thermal Oxidizer

When a nationally recognized web and sheetfed commercial printer opened a large new production facility, they replaced three older catalytic oxidizers with an energy efficient Regenerative Thermal Oxidizer from The CMM Group.

The 15,000 scfm CMM RTO is designed to destroy 99%+ of the 340 pounds of printing solvent VOCs present in the exhaust emissions from up to four web printing presses that operate 24 hours per day, 7 days per week.

Further information may be obtained by contacting The CMM Group, LLC at
Please enable Javascript to see the email address

 

  • Permalink Gallery

    Medical Technology Co. Installs RTO To Control Coating Emissions

Medical Technology Co. Installs RTO To Control Coating Emissions

To handle the heptane and isopropyl alcohol emissions created in the manufacturing process of syringes, the Midwestern plant of a global medical technology company selected The CMM Group to install a Regenerative Thermal Oxidizer.

Installed outdoors on a concrete pad, the 4,000 scfm RTO , has an operating set point of 1,500°F and is designed to destroy 98% of the VOCs, as required by USEPA Method 25A, generated by the company’s nine coating lines during the facility’s 24 hours per day, 7 days per week production schedule. After installation, Method 25A testing confirmed the CMM RTO was exceeding the […]

  • Permalink Gallery

    Manufacturer Of Ribbons Installs RTO, Energy Recovery System

Manufacturer Of Ribbons Installs RTO, Energy Recovery System

To control the exhaust emissions from up to three coating line dryers, a leading manufacturer of print marking ribbons installed a Regenerative Thermal Oxidizer equipped with a secondary heat-recovery system from The CMM Group.

The CMM RTO replaced an aging thermal recuperative oxidizer that presented both maintenance and operating cost problems because of its natural gas usage. The 22,500 scfm RTO from CMM is designed to destroy 99%+ of the hexane, isopropyl alcohol and toluene VOCs generated by the company’s three coating line dryers. The unit is designed to be self-sustaining with an inlet VOC concentration of approximately 9% LFL. […]

Printed Circuit Board Manufacturer Selects CMM’s RTO

To control the 60 to 80 pounds per hour of MEK, acetone, DMF and toluene VOCs emitted from a treater/dryer, a leading manufacturer of printed circuit boards used in a variety of applications including high-end computing, telecommunications, military medical, automotive, etc., installed a (3,000?- 10,000?) scfm Regenerative Thermal Oxidizer from The CMM Group.

Featuring pneumatic poppet valves for the heat exchanger canister airflow switching, the CMM RTO destroys 98% of the VOCs generated during the company’s 24 hour per day/6 days per week production schedule.

Further information may be obtained by contacting The CMM Group, LLC at
Please enable Javascript […]

  • Permalink Gallery

    Coating & Laminating Company With Rewarranted Catalytic Oxidizer

Coating & Laminating Company With Rewarranted Catalytic Oxidizer

When a manufacturer of custom coated and laminated films and metalized films needed to replace an old catalytic oxidizer, they selected The CMM Group to provide them with a rewarranted 19,000 scfm catalytic oxidizer.

After the original unit was picked up, inspected and equipped with any required replacement parts, CMM delivered and set-up the unit at the customer site. Equipped with a precious metal bead type catalyst, the unit was guaranteed to provide a 98% VOC destruction efficiency and includes an insulated hot-side by-pass duct with an automated damper, 70% efficient plate type heat exchanger with heavy duty expansion joints […]

  • Permalink

    Wine Capsule Flexo Printer Installs RTO To Control Emissions

Wine Capsule Flexo Printer Installs RTO To Control Emissions

As part of the move into a new facility in Northern California, a rotogravure printer specializing in the production of caps, labels and capsules for the wine industry installed a new 6-color narrow web printing press along with a 15,000 scfm Regenerative Thermal Oxidizer from The CMM Group to destroy the VOCs present in the 125°F press exhaust emissions.

Designed to accommodate the addition of a similar sized press, the CMM RTO can destroy 98% of the ink/solvent VOCs currently produced as well as those generated during the 24 hour per day/7 day per week production schedule planned for the […]

Custom Designed Cheese Pre-Melter

When one of America’s largest frozen pizza manufacturer’s decided it was time to replace their existing convection oven pre-melters; they selected The CMM Group, LLC to fulfill their needs. An infrared pre-melter, also commonly known as an IR cheese pre-melter, emits a flash of heat to the top of a frozen pizza to gently fuse the cheese and additional toppings together. This process reduces topping movement during the packaging and distribution processes. The CMM Group custom engineered the equipment to allow the manufacturer the freedom to choose between multiple recipe options through the use of adjustable temperature and line […]

  • Catalytic Oxidizers
    Permalink

    Food Company Selects Catalytic Oxidizer Pizza Production Plant

Food Company Selects Catalytic Oxidizer Pizza Production Plant

To control the 30+ pounds of ethanol emissions produced per hour from a food equipment production oven at its Kentucky pizza plant, one of the nation’s leading food companies installed a Catalytic Oxidizer from The CMM Group.

Installed on an outdoor concrete pad, the 3,500 scfm CMM Catalytic Oxidizer utilizes precious metal monolith catalyst to destroy 98% of the VOCs produced during the company’s 24 hours per day, 6 days per week production schedule.

Further information may be obtained by contacting The CMM Group, LLC at
Please enable Javascript to see the email address

 

Baking Operation Installs Recuperative Catalytic Oxidizer

With the installation of three ovens that operate 110 to 140 hours per five day week, a major Midwest baking operation producing white pan bread needed to install air pollution controls. Because of their ability to meet certain time constraints and because they were the most responsive to the customer’s needs, The CMM Group was selected for a turnkey installation of a Recuperative Catalytic Oxidizer to destroy the 20 to 50 pounds of ethanol emissions produced per hour in the bread and roll baking oven exhaust.

Outfitted with monolith block, platinum group precious metal catalyst, the CMM Recuperative Catalytic Oxidizer […]